UMG mobile dental cabinets keep instruments, consumables and small equipment organised at the point of use. A metal drawer frame, a tempered glass or phoenix stone countertop and four casters let one unit serve a treatment room, an operatory or a shared clinic floor.
We manufacture these mobile dental carts in Tangshan, China, and supply clinics, distributors and OEM buyers across Europe, the United States, the Middle East and Africa. Send your drawer layout and countertop preference, and we will quote against your order quantity and destination.
It is a storage unit on casters, built to stand beside the dental chair rather than against a wall. UMG makes it in two versions, and the version decides how the unit is used.
Closed drawers carry handpieces, burs, impression materials and boxed supplies in separate compartments. Storage runs across upper, middle and lower levels, so small parts and bulky items do not compete for one deep drawer.
The open version uses the same base and countertop but replaces drawers with shelves, which suits a curing light, scanner or small motor that remains plugged in. Both versions are described in the dental cart range.
Storage and transport is the function here. A system that carries its own air and suction supply is a separate product, so if your workflow needs one, compare the portable dental unit range.
Four components define the unit, and each one can be specified to the way your clinic works.
Drawers run on a metal frame with metal slides, and heights are combined rather than fixed. Long files, small burs and boxed consumables can therefore sit in one unit without sharing a compartment.
Available with tempered glass or artificial phoenix stone countertops for different clinical workspace requirements. Thickness, colour and surface details are set out in the next section.
Four casters let one person push a cabinet from surgery to surgery without lifting it. Two of them lock, holding the unit in place while a drawer is open or an instrument is in use.
Three sockets are fitted to the column and connected through a power cord. Socket standard and electrical rating are confirmed with the order, because they differ by market.
Two countertop materials are stocked, and the choice usually comes down to colour, thickness and how much handling the surface takes.
Tempered glass gives the cabinet a clean, clinical finish and is produced in blue and green. The colour is chosen so the cabinet can be matched to a chair or cabinetry already installed in the clinic.
Phoenix stone is the thicker of the two and takes the harder wear of a unit that is handled all day. Available stone colours are confirmed with the factory before an order is released.
| Countertop | Tempered glass | Artificial phoenix stone |
|---|---|---|
| Thickness | 15 mm | 18 mm |
| Colours | Blue, green | Confirmed with the factory |
| Surface properties | Wear-resistant, corrosion-resistant, easy to clean | Harder surface, wear-resistant, corrosion-resistant, easy to clean |
| Suits | Colour-matched operatories | Heavy daily handling |
Thickness and glass colours are the published options. Phoenix stone colours and any surface finish outside these options are confirmed with the factory at quotation.
The table lists the configuration that is standard across the range. Anything that changes with the drawer layout is settled on the approved drawing.
| Parameter | Specification |
|---|---|
| Product type | Mobile dental cabinet / dental trolley |
| Drawer configuration | Customizable drawer combinations |
| Drawer structure | Metal frame with resistance slides |
| Countertop options | 15 mm tempered glass / 18 mm artificial phoenix stone |
| Glass countertop colours | Blue / green |
| Countertop properties | Wear-resistant, corrosion-resistant and easy to clean |
| Mobility | 4 casters, including 2 with brakes |
| Power sockets | 3 sockets, connected through a power cord |
| Applications | Dental clinics and beauty facilities |
Drawer count, cabinet dimensions, unit weight and carton size follow the approved layout, so they are quoted with the drawing rather than fixed in the table. The shelf build is set out on our dental trolley and cart page.
Cabinets are specified room by room, so the drawer mix follows the work done in that space.
In a multi-chair clinic, one cabinet per operatory keeps the day's instruments and consumables at hand. It also cuts the walks to the store room between patients.
Surgical and implant rooms use the cabinet as a mobile instrument table that moves to the head of the chair. Everything is locked away and rolled out again when the room is reset.
Laboratories take the drawer version for burs, discs, pins and small tooling, where the flat top also works as a bench extension.
Aesthetic clinics order the same unit as a treatment trolley, since the countertop and casters suit any small-device workflow.
Most orders are built to a layout sheet rather than taken from stock, and the changes below are the ones buyers ask for most.
Drawer heights, drawer count and internal dividers are set from your instrument list. Long instruments and small parts then get their own space instead of sharing one deep drawer, and the arrangement is returned as a drawing for approval.
Glass colour, phoenix stone finish, drawer front colour and handle colour are chosen together. That lets one cabinet match a chair or a cabinet run that is already installed in the clinic.
Distributors can discuss private-label supply, with their own manual and carton print; the exact scope is confirmed per project. Cartons are then specified against the shipping method so freight volume stays workable.
UMG is Tangshan UMG Medical Instrument Co., Ltd., a dental equipment manufacturer producing cabinets alongside chairs, units and models.
The company has passed the ISO 13485 audit and holds CE and ISO certification, and its dental products sell into Europe, Southeast Asia, the United States, Australia, the Middle East and Africa.
One contact handles your order from quotation to delivery and shares production photos and videos before shipment. The after-sales team answers 24 hours a day, holidays included.
Cabinets are checked against the approved drawing before packing, and layout or packaging questions go back to the same team that quoted the order.
Plant photos and equipment details are collected on our factory show page; certification is listed under honor certificates.
The two names describe the same four-caster base. A cabinet closes with drawers for instruments and consumables, while a cart is usually open-shelved for equipment that stays connected. Both can be ordered with the same countertop.
The countertop is 15 mm tempered glass or 18 mm artificial phoenix stone, both wear-resistant and corrosion-resistant. Drawers run on a metal frame with metal slides, and cabinet panel specification is confirmed on the drawing.
Yes. Drawer count, drawer heights, internal dividers, countertop material and colour are all set per order. Send a sketch or a list of what has to fit, and we will return a layout.
Every unit has four casters, two of which lock. That holds the cabinet steady while a drawer is open, and releases with a foot press to move it again.
MOQ is set per layout and order type, so it is quoted with your specification rather than published as a single figure. Following our shipping policy, stock items ship in 7–15 days and built-to-order units in 15–30 days, confirmed again at quotation.
Because each cabinet is built to a layout, MOQ and price follow the specification rather than a fixed list.
Prices are ex-works. We can quote FOB, CFR, CIF, CPT, CIP, DDP or express terms, and accept T/T, L/C, PayPal, Western Union or Escrow.
Tell us what has to fit inside the cabinet and how many units you need. We will confirm the layout, countertop and delivery schedule.
Send Your Requirements