+86-315-6314398

Needle Holder

It is composed of a clamp beak, joint and clamp handle, the head has reticulation teeth, the tail has a finger ring, and the middle is connected and fixed with rivets after piercing the gills, and the locking teeth are between the two finger rings to play a clamping and fixing role. It can be used repeatedly.


Product  usage

Used for gripping suture needles, metal clips and other instruments


Model of Needle Holder

120-1250

Needle holder 12.5cm Fine

120-1400

Needle holder 14cm Fine

120-1401

Needle holder 14cm Rough

120-1600

Needle holder 16cm Fine

120-1601

Needle holder 16cm Rough

120-1800

Needle holder 18cm Fine

120-1801

Needle holder 18cm Rough

121-1250

Needle holder with gold 12.5cm fine and straight

121-1251

Needle holder with gold 12.5cm rough and straight

121-1400

Needle holder with gold 14cm fine and straight

121-1401

Needle holder with gold 14cm rough and straight

121-1600

Needle holder with gold 16cm fine and straight

121-1601

Needle holder with gold 16cm rough and straight

121-1800

Needle holder with gold 18cm fine and straight

121-1801

Needle holder with gold 18cm rough and straight

121-2400

Needle holder with gold 14cm fine and curved

121-2401

Needle holder with gold 14cm rough and curved

121-2600

Needle holder with gold 16cm fine and curved

121-2601

Needle holder with gold 16cm rough and curved

120 series

119NEEDLE_HOLDER.jpg


121 series

120NEEDLE_HOLDER.jpg


Product Performance Structure And Composition

The needle holder shall be made of 3Cr13, 3Cr13Mo and 4Cr13 materials as specified in GB/T1220, and the surface of the product shall be treated by electroplating (chromium).


  • Good elasticity and firmness

  • Good clamping function

  • Pliers open and close, the gill should be easy and flexible, there should be no jam phenomenon

  • Pliers should be symmetrical, the surface is clean, there should be no edge, burr, crack, trachoma

  • forceps lip head teeth, lock stop teeth should be clear, complete, no edge. When the end of the teeth or lock lock lock, the lip head tooth front three-fifths of the tooth surface should be in contact.

  • Good corrosion resistance



Contact Us
Get in Touch